Prototype I2C interface to Aibo Battery standalone with LCD.
Read Battery Data from Aibo ERS2xx, ERS3xx and ERS7 series.
- Arduino Uno Board
- LCD Screen 1602
- pin headers to solder to the LCD display pins
- 10k ohm potentiometer
- 220 ohm resistor
- 2x 4,7 Kohm resistor
- hook-up wires
- Aibo Battery connector
Let’s start with connecting the LCD to the Arduino.
Follow this Step-by-step instructions: Arduino LCD Tutorial !
If everything works fine we can start wiring the battery connector.
Installing the code
Here comes the code for the Battery Reader [Get Code]
If you like you can put everything in a nice Arduino case.